Tubular Electric Heater

For production of heating elements the modern high-performance equipment of known firms is used: “Kanthal Machinery AB” (Sweden); Oakley Industries, INC (USA); CSM Machinery, srl (Italy); Granlund Machinery (Sweden); «Taip Automation, srl» (Italy), «FAGOR SISTEMAS, S. Coop. Ltda »(Spain). The materials used in the production of heating elements provide high reliability and long service life. TEH is a heater, which consists of a metal tube of round cross-section, inside which is placed a heating coil made of wire with high ohmic resistance. The spiral is separated from the walls of the tube by a material that provides electrical insulation but is a good conductor of heat. Electrotechnical periclase is used as such material. Contact rods are welded to the ends of the spiral. The main function of such a product is the conversion of electrical energy into heat.

EKC – Cast Iron Electric Hotplate

Cast iron electric hotplates (EKC) for households are made on the automatic line of FAGOR SISTEMAS, S.Coop.Ltda firm (Spain). Materials and components used in the manufacture of electric hotplates provide high reliability and long service life. EKC – Cast iron electric hotplate – is a heater consisting of a cast iron housing, in the middle of which are placed three heating elements (spirals of resistance wire), placed in a material that provides electrical insulation, but is a good conductor of heat. On the lower side of the cast iron housing there is a protective cover, through which the contacts of the heating elements are removed through the ceramic insulators. Along the perimeter of the cast-iron case there is a stainless steel rim, which not only performs a decorative function but also allows you to correctly place the electric hotplate on the table of the electric stove. The heating surface is protected from corrosion by high-temperature silicone paint. It is used as a heating element for a complete set of household electric stoves and table electric stoves.

Electric Hotplate

Electric hotplate (EH) for professional plates are made on the modern high-performance equipment Materials and components used in the manufacture of electric burners provide high reliability and long service life. HP electric burners meet the requirements of TU U 00244676.001-99. EH – electric hotplate – a heater consisting of a cast iron housing, in the middle of which are placed two heating elements (spirals of resistance wire), inserted into ceramic insulating inserts of special design. Tubular electric heaters (TEHs) can also be used as heating elements. In this case, HP electric hotplate have greater thermal efficiency and reliability. On the lower side of the cast iron housing there is a protective cover, through which the contacts of the heating elements are removed through the ceramic insulators. The protective cover is removable, which allows you to repair the electric hotplate in case of burnout of heating elements, which can be purchased separately, in the form of a repair kit. The heating surface is protected from corrosion by high-temperature silicone paint. The main function of such a product is the conversion of electrical energy into heat. It is used as a heating element for a complete set of professional electric stoves.