Heater to the boiler Thermex 1000-2000W 230V on a flange of 63mm

The 1000–2000 W 230 V Heating Element for Thermex Water Heaters with Ø63 mm Flange is designed to replace the original heating element in domestic electric storage water heaters. The product range includes 1000 W (350+650 W) and 2000 W (700+1300 W) versions, providing fast, efficient, and uniform water heating.

Electron-T heating elements are manufactured using modern automated production equipment and premium-quality materials. Depending on the application, the heating element is available in copper, AISI 304 stainless steel, or AISI 316L stainless steel. Every product undergoes strict quality control, complies with European safety standards, and is supplied with a product passport and manufacturer’s warranty.

Key Advantages

• Available in 1000 W and 2000 W power ratings.
• Fast and efficient water heating.
• Uniform heat distribution across the entire heating element.
• Manufactured from copper, AISI 304, or AISI 316L stainless steel.
• Excellent corrosion and limescale resistance.
• Long service life.
• Fully compatible with the standard Ø63 mm flange.
• Complies with EN 60335-1:2015 and GOST 19108-81.
• Manufactured in Ukraine by Electron-T.

Compatible Brands

This heating element is compatible with electric storage water heaters manufactured by:

• Thermex;
• Amina;
• Hotlex;
• Electrolux;
• Termolux;
• Elsotherm;
• Smales;
• Polaris;
• Platinum.

It can also be used in other storage water heaters designed for a Ø63 mm flange heating element with matching technical specifications.

Compatible Thermex Models

The heating element is suitable for the following Thermex water heater models:

• RZL 30VS
• RZL 50VS
• RZL 80VS
• RZL 100VS
• RZL 120VS
• RZL 150VS
• IR 30V
• IR 50V
• IR 80V
• IR 100V
• IR 120V
• IR 150V

Installation and Maintenance Recommendations

• Installation or replacement of the heating element should be carried out by qualified personnel.
• When replacing the heating element, it is recommended to install a new magnesium anode to significantly extend the service life of the heating element and protect the water tank from corrosion.
• A new sealing gasket should be installed to ensure a reliable, leak-free connection.
• Regularly remove limescale deposits from both the water tank and the heating element.
• Always follow the water heater manufacturer’s installation instructions and electrical safety requirements.

The 1000–2000 W 230 V Thermex Heating Element with Ø63 mm Flange is a reliable solution for repairing and maintaining domestic electric storage water heaters. Thanks to its high manufacturing quality, efficient heating performance, and full compatibility with original mounting dimensions, it ensures dependable operation, energy efficiency, and a long service life.