Heater to the boiler Thermex 1300W 230V on a flange of 63mm

from 337.20 hrn hrn/pc

Heater 1300 W 230 V is suitable for all brands of electric water heaters (boilers) Thermex, Electrolux, Hotlex, Amina, Smales, Polaris, Pt, GaranTherm, which use this type of heating elements. Heater for the boiler is made of high quality copper and stainless steel (AISI 304) tube and modern equipment.

Код РИВШ.681827.Voltage (V)Power (W)Heating element materialDiameter of heating elementsL, мм
3502301300AISI-3048.5310
350-012301300Copper8.5310
452.40 hrn hrn/pc
3612301300Copper8.5245
394.80 hrn hrn/pc
9612301300AISI-3048.5245
337.20 hrn hrn/pc
8962301300Copper8.5245
394.80 hrn hrn/pc
39702301300AISI-3048.5245
361-012301300AISI-316L8.5245
12252301300AISI-3048.5310
General information

Heaters for the boiler are suitable for the following models – RZB F (RZB 30 F, RZB 50 F, RZB 80 F, RZB 100 F), RZB L (RZB 30 L, RZB 50 L, RZB 80 L, RZB 100 L), IF V (IF 30 V, IF 50 V, IF 80 V, IF 100 V), ID V (ID 30 V, ID 50 V, ID 80 V, ID 100 V).

The heating element for the Electron-T boiler is manufactured in accordance with the requirements of EN 60335-1: 2015 and GOST 19108-81. Manufacturing processes and the product itself are certified and meet European standards ISO and TUV NORD. At purchase of heater for a boiler the passport for a product is issued.

Recommendations for installation and operation of the Heater for the Thermex boiler:

All safety requirements must be met in accordance with the operating documents for the boiler (electric water heater, boiler).
Installation or replacement of the boiler heater must be carried out by certified specialists.
Use copper heating element only for water heating.
A magnesium anode must be installed for long-term operation of the boiler heater.
A sealing ring must be installed for better sealing of the heating element.
Heater is a very important element for the water heater, so its operation must be carefully monitored.