Heater to the boiler Atlantic 1500-2000W 220V on a flange of 48 mm

from 400.00 hrn hrn/pc

Heater 1500-2000W 230V on a brass flange of 48 mm is suitable for all brands of electric water heaters (boilers) Atlantic, Round, Classic, Thermor who use this type of heating elements. Heater for a boiler is made of a qualitative copper pipe on the modern equipment.

Код РИВШ.681827.Voltage (V)Power (W)Heating element materialDiameter of heating elementsL, мм
400.00 hrn hrn/pc
480.00 hrn hrn/pc
General information

Heaters are suitable for boiler models – VM 050 D400-1-M, VM 080 D400-1-M, VM 100 D400-1-M, VMR 50, VMR 80, VMR 100, VM 50 N4L, VM 80 N4L, VM 100 N4L, Slim PC 30, Slim PC 50, Slim PC 75, PC 10 RB, PC 15 R, VM 050 D400-2-B, VM 080 D400-2-B, VM 100 D400-2-B, VM 050 D400-3-E, VM 080 D400-3-E,  VM 100 D400-3-E.

The heating element for the Electron-T boiler is manufactured in accordance with the requirements of EN 60335-1: 2015 and GOST 19108-81. Manufacturing processes and the product itself are certified and meet European standards ISO and TUV NORD. At purchase of heaters for a boiler the passport for a product is issued.

Recommendations for the installation and operation of the boiler heater:

All safety requirements must be met in accordance with the operating documents for the boiler (Electric water heaters, boiler).
Installation or replacement of the boiler heater must be carried out by certified specialists.
Use copper heating element only for water heating.
To control the water temperature it is necessary to install a thermostat.
A magnesium anode must be installed for long-term operation of the boiler heater.
For better sealing of the heating element to the flange it is necessary to install a sealing ring.
Heating elements is a very important element for the water heater, so its operation must be carefully monitored.